Description
The CyberData 2-Port PoE Gigabit Switch is designed to expand a single PoE network connection into one or two PoE network ports.
Pass through PoE Power
The CyberData 2-Port PoE Gigabit Switch is powered from a single 802.3at or 802.3af network switch and or power source and passes that power through to one or both of the switch ports
In the basic configuration, one of the Gigabit ports can drive a VoIP phone directly with PoE and the other Gigabit port can be connected to a user’s PC.
No external power supplies are required.
Features
Power
Fully compliant to IEEE 802.3af/at standard
1 Power Device (PD) input port 802.3af or 802.3at
2 Power Source Equipment (PSE) output ports 802.3af or 802.3at (dependent on PD input)
Data
All ports are 10/100/1000Mbps (10BASE-T,100BASE-TX,1000BASE-T) auto sensing based upon the port's individual connection
Each port has auto MDI-X
802.11q VLAN tagging
Automatic address learning, address aging and address migration
Supports 9216-byte jumbo frame length
Notification
Link/Status and connection speed LEDs
Specs
Ethernet I/F |
10/100/1000 Mbps, Auto MDI-X, RJ45 |
Power Distribution |
Input |
PD input up to 30W:
802.3af @ 15W
802.3at @ 25W
Generic PoE Injector up to 30W
|
Internal Circuit Use |
2W |
Output* |
Power available to share between two PSE outputs:
13W with 802.3af input
23W with 802.3at input
28W with generic 30W PoE injector input
|
Operating Range |
Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
Storage Temperature |
-40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) |
Storage Altitude |
Up to 15,000 ft. (4573 m) |
Dimensions** |
Length: 5.31 inches [134.8 mm] Width: 3.03 inches [76.9 mm] Height: 1.06 inches [26.9 mm]
|
Weight Boxed Weight
|
0.56 lbs. [0.25 kg] 1.0 lbs. [.54 kg]
|
Compliance |
CE: EMC Directive - Class A EN 55032, EN 55035 & EN 61000, LV Safety Directive- EN 62368-1; RoHS Compliant; FCC Part 15 Class A; IEEE 802.3 Compliant |
Warranty |
2 years limited |
Part Number |
011187 |
*Either one or both of the PSE outputs can provide PoE power as long as the overall PSE output wattage is 2W less than the PD input.
**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
Installation
Network Connection
The Standard RJ-45 Introduction
The Standard Cable, RJ-45 Pin Assignment
Downloads